A status light system should be installed if a condition exists on an installation which may be hazardous for the helicopter or its occupants. The system should be a flashing red light (or lights), visible to the pilot from any direction of approach and on any landing heading. The aeronautical meaning of a flashing red light is either “do not land, aerodrome not available for landing” or “move clear of landing area”.
TRANBERG® Status Light (Repeater)
The Tranberg Repeater Status Light compliments the Tranberg Main Status Light, and is utilized to provide a 360° visibility when helicopter is landed on deck. Lower light intensity than the Main Light.
| Vekt | 9 kg |
|---|---|
| Dimensjoner | 200 × 263 × 138 mm |
| Material | Aluminium |
| Surface Treatment | Powder coated |
| Operating Frequency | 50/60 Hz |
| Rated Power | 3,5W |
| Operating Temperature | -40°C to 55°C |
| IP Rating | IP 66/67 |
| Voltage | 16-32 VDC |
| External Colour | White |
| Light Source | LED |
| IECEx certificate no. | IECEx PRE 16.0082X |
| IECEx Protection | Ex db op is |
| ATEX Certificate | Presafe 16 ATEX 8850 X |
| ATEX protection type | Ex db op is |
| Ex Classification | II 2 G |
| T Class | 5 |
| CAA UK | CAP437 |
| CAA Norway | Yes |
| Applicable zones | Zone 1, zone 2 and safe |
| Color of Light | Red |
| Reflector diameter (mm) | Aluminium |
| Glass/dome Material | Tempered Glass |
| Glass/dome diameter (mm) | Aluminium |
| Horizontal | 102 |
| Pan (deg) | 180 |
| Tilt (deg) | 90 ° |
| Luminous Intensity (cd) | 60 |
| Lamp Holder | Aluminium |
Relaterte produkter
8 circuits 220-240 VAC 50/60Hz, B10 A circuit breakers.
Aviation
The TRANBERG TEF 9968 windsock provides pilots with an indication of the wind direction. The windsock assembly is designed out of corrosion-resistant materials. All exposed materials are Stainless steel AISI 316L and brass. Our windsocks is designed for all areas and comes with Ex-certifications and ATEX, IECEX.
Aviation
TEF 9975 LED Floodlight, Helideck Floodlight System Explosive atmospheres: Zone 1, 2 & Safe Area & Areas with combustible dust: Zone 21 & 22
Aviation
TEF 2440 LED Obstruction Light Low Intensity, Type B Safe Area Material: Acid proof stainless steel powder coated RAL9010 Globe: Polycarbonate, red Input voltage: 230 VAC 50/60Hz, 24 VAC/VDC Light output: >32cd. (According to ICAO Annex 14 Vol. 1 Ch. 6 Low Intensity Type B) Power consumption: Max. 10W Life length, light source: Min. 50,000 working hours Cable entries: 2 x Ø25 mm Delivered with 2 x E204/622 M25/D kit, brass Cable diameter: 11,0-15,0 mm -15,0-20,1 mm Operating temperature: -30° to +45°C Ingress protection: IP66 Weight w/ package: 2.0 kg
Aviation
The TEF9980 Status lights are designed to fulfil the latest requirements of CAA UK CAP 437, as well as the operator’s needs for products that are cost-effective, reliable, requiring no maintenance and applicable for use in all environments.
Aviation
Aviation
TEF 2460 Obstruction Light LED Zone 1, Zone 2 & Safe Area Tranberg TEF 2460 EX Obstruction Light is a high quality fixture which can be used in most applications, especially for those hard to reach places. Covering the requirements within ICAO for Low Intensity obstruction lights (Type A & B), it is a versatile unit which exceeds customer expectations.
Aviation
The Tranberg TEF 2460 Perimeter Light is a high quality and duarble fixture, which can be used in almost all enviroments. With it's small foot print and use of high-end material, the Tranberg TEF 2460 Perimeter Light can tackle the harshes conditions onshore and offshore, in Zone 1 areas or Safe Zone areas.
