Low-profile cable clamps in 16 mm acid-resistant stainless steel AISI 316L for one or two cables from 8 to 38 mm, plus a weld-on support with two M6 holes. Ten sizes, Ø 7 mm mounting hole, 2.0–3.0 mm thick. Select below.
Accessories
Brass earth tag fitted under the cable gland or lock nut for bonding gland, armour and enclosure to earth. Six sizes M16–M50 – select below.
Brass insert that blanks an unused E204/622 or E205/624 cable gland while keeping its Ex e certification and IP66/67 rating. Seven sizes by sealing ring code A1–E2, with STEP files – select below.
Accessories
Flat PTFE (Teflon) gasket, 2 mm thick, for sealing between cable gland and enclosure. Required to maintain the IP rating of TEF E204/622, E205/624 and D621 glands. Ten sizes M12–M90 – select below.
Internally serrated washer in stainless steel AISI 316, fitted between cable gland and enclosure for earth continuity and resistance to loosening under vibration. Eight sizes M16–M75 – select below.
Lock Nuts
Hexagonal brass lock nut with female metric thread for fastening cable glands, stopping plugs and adaptors. Ten sizes M16–M100 – select below.
Hexagonal stainless steel AISI 316 lock nut with female metric thread for fastening cable glands, stopping plugs and adaptors in corrosive and offshore environments. Eight sizes M16–M75 – select below.
Self-locking hexagonal brass nut with female metric thread for cable glands, stopping plugs and adaptors exposed to vibration. Four sizes M16–M32 with STEP files – select below.
