A status light system should be installed if a condition exists on an installation which may be hazardous for the helicopter or its occupants. The system should be a flashing red light (or lights), visible to the pilot from any direction of approach and on any landing heading. The aeronautical meaning of a flashing red light is either “do not land, aerodrome not available for landing” or “move clear of landing area”.
TRANBERG® Status Light (Repeater)
The Tranberg Repeater Status Light compliments the Tranberg Main Status Light, and is utilized to provide a 360° visibility when helicopter is landed on deck. Lower light intensity than the Main Light.
Declaration of Conformity
EU DoC for TEF 9980
Product Certificate
TEF 9980 Certificate ATEX
Product Certificate
TEF 9980 Certificate IECEx
Datasheet
TEF 9980 Datasheet Status light for heli [TPS5630]
User Manual
TEF 9980 User Manual Status light [TUM5721]
Drawing
TEF9980 Low profile Assembly - DIMENSION DRAWING
| Weight | 9 kg |
|---|---|
| Dimensions | 200 × 263 × 138 mm |
| Material | |
| Surface Treatment | |
| Operating Frequency | |
| Rated Power | |
| Operating Temperature | |
| IP Rating | |
| Voltage | |
| External Colour | |
| Light Source | |
| IECEx certificate no. | |
| IECEx Protection | |
| ATEX Certificate | |
| ATEX protection type | |
| Ex Classification | |
| T Class | |
| CAA UK | |
| CAA Norway | |
| Applicable zones | |
| Color of Light | |
| Reflector diameter (mm) | |
| Glass/dome Material | |
| Glass/dome diameter (mm) | |
| Horizontal | |
| Pan (deg) | |
| Tilt (deg) | |
| Luminous Intensity (cd) | |
| Lamp Holder |
Related products
Aviation
TEF 9975 LED Floodlight, Helideck Floodlight System Explosive atmospheres: Zone 1, 2 & Safe Area & Areas with combustible dust: Zone 21 & 22
Aviation
The TEF9980 Status lights are designed to fulfil the latest requirements of CAA UK CAP 437, as well as the operator’s needs for products that are cost-effective, reliable, requiring no maintenance and applicable for use in all environments.
Aviation
The Tranberg TEF 9968 windsock provides pilots with an indication of the wind direction. The windsock assembly is designed out of corrosion-resistant materials. All exposed materials are Stainless steel AISI 316L and brass. TEF 9968 is designed for use in all areas.
Aviation
Cleanly and clearly indicating the TD/PM Circle and H, the TRANBERG® IMT CIRCLEH stands out through its robust design, use of only the most durable materials, ease of installation and minimum of maintenance requirements.
Aviation
TEF 2440 LED Obstruction Light Low Intensity, Type B Safe Area Material: Acid proof stainless steel powder coated RAL9010 Globe: Polycarbonate, red Input voltage: 230 VAC 50/60Hz, 24 VAC/VDC Light output: >32cd. (According to ICAO Annex 14 Vol. 1 Ch. 6 Low Intensity Type B) Power consumption: Max. 10W Life length, light source: Min. 50,000 working hours Cable entries: 2 x Ø25 mm Delivered with 2 x E204/622 M25/D kit, brass Cable diameter: 11,0-15,0 mm -15,0-20,1 mm Operating temperature: -30° to +45°C Ingress protection: IP66 Weight w/ package: 2.0 kg
Aviation
The Tranberg TEF 2460 Perimeter Light is a high quality and duarble fixture, which can be used in almost all enviroments. With it's small foot print and use of high-end material, the Tranberg TEF 2460 Perimeter Light can tackle the harshes conditions onshore and offshore, in Zone 1 areas or Safe Zone areas.