The CMP Sapphire SHDSS is a hinged, heavy-duty cable cleat in stainless steel 316L for single and parallel cable formations under extreme conditions, engineered to IEC 61914 and tested for high short-circuit forces (up to 110 kA peak, 50 kA RMS). The hinged design with M12 and M10 fixing points gives installation flexibility, and LSF/LS0H, phosphorus-free liners protect the cable against abrasion, thermal movement and damage. Rated from −60 °C to +60 °C for offshore, marine and high-voltage installations. R. STAHL Tranberg supplies the Sapphire range with our cable glands and enclosures.
Application
- Single and parallel cable formations, cable diameters approx. 19 to 120 mm
- Offshore, marine and high-voltage installations, −60 °C to +60 °C
- Short-circuit restraint of power cables under extreme fault levels
Features and benefits
- Stainless steel 316L, corrosion-resistant
- Heavy duty: up to 110 kA peak, 50 kA RMS
- Hinged design with M12 and M10 fixing points
- LSF/LS0H, phosphorus-free liners
- Tested to IEC 61914
Technical data
| Material | Stainless steel 316L, polymer liners LSF/LS0H |
|---|---|
| Formation | Single and parallel |
| Fixing | M12 and M10 |
| Short-circuit withstand | Up to 110 kA peak, 50 kA RMS |
| Temperature | −60 °C to +60 °C |
| Standard | IEC 61914 |
For trefoil formations, see the CMP Patriot SDSS. Select the cleat by the outer diameter of the cable; spacing and quantities depend on the fault level, see CMP’s cleat spacing guidance or ask us.
