TEF 2460 Perimeter light: Green LED, 30Cd, 110-254VAC, IECEx IP66/67, Brass/Glass.
| Weight | 4 kg |
|---|---|
| Dimensions | 110 × 140 × 141 mm |
| Material | Brass, Cast copper alloy |
| SAP-Number | 241034 |
| Operating Frequency | 50/60 Hz |
| Rated Power | 5 W |
| Operating Temperature | -55deg. C to +55deg. C |
| IP Rating | IP 66/67 |
| Voltage | 100-254 VAC |
| Light Source | LED |
| IECEx certificate no. | IECEx Pre 14.0009 |
| IECEx Protection | Ex eb mb op is |
| ATEX Certificate | Presafe 14ATEX4571 |
| ATEX/IECExtemp range | -55deg. C to +55deg. C |
| Ex Classification | Ex eb mb op is IIC T5 G |
| T Class | T5 |
| CAA UK | CAP168 + CAP 437, CAP437 |
| CAA Norway | BSL & Norsok |
| Applicable zones | Zone 1, zone 2 and safe |
| Other information | According to ICAO Annex 14 Vol. II and CAP 437) |
| Color of Light | Green |
| Gasket in lid | Silicon |
| Glass/dome Material | Glass |
| Luminous Intensity (cd) | 30 |
Related products
Aviation
The Tranberg TEF 2460 Perimeter Light is a high quality and duarble fixture, which can be used in almost all enviroments. With it's small foot print and use of high-end material, the Tranberg TEF 2460 Perimeter Light can tackle the harshes conditions onshore and offshore, in Zone 1 areas or Safe Zone areas.
Aviation
The TEF9980 Status lights are designed to fulfil the latest requirements of CAA UK CAP 437, as well as the operator’s needs for products that are cost-effective, reliable, requiring no maintenance and applicable for use in all environments.
Aviation
TEF 9975 LED Floodlight, Helideck Floodlight System Explosive atmospheres: Zone 1, 2 & Safe Area & Areas with combustible dust: Zone 21 & 22
Aviation
The Tranberg Repeater Status Light compliments the Tranberg Main Status Light, and is utilized to provide a 360° visibility when helicopter is landed on deck. Lower light intensity than the Main Light.
8 circuits 220-240 VAC 50/60Hz, B10 A circuit breakers.
Windsock
The TRANBERG TEF 9968 windsock provides pilots with an indication of the wind direction. The windsock assembly is designed out of corrosion-resistant materials. All exposed materials are Stainless steel AISI 316L and brass. Our windsocks is designed for all areas and comes with Ex-certifications and ATEX, IECEX.



