Marine · 64 products · 5 product groups
Marine Lighting & Control Systems for Safe and Reliable Shipping
Our Marine portfolio is trusted worldwide for safe and efficient shipping operations.
See the area →Solutions
Products for marine, energy and aviation
Ex-certified equipment, heat tracing systems and marine lighting, designed and built at our own factory in Norway. Choose an area to see the product groups, or go straight to downloads for brochures and certificates.
- ATEX, IECEx and DNV MED
- Own factory and R&D
- Distributors in 40+ countries
- Datasheets on every product page
Energy · 158 products · 10 product groups
Energy Solutions for Offshore, Oil & Gas, and Industrial Applications
There are few higher-stakes environments when it comes to safety and reliability than the oil and gas sector.
- Cable Glands, Stopping Plugs & Adaptors
- Junction & Terminal Boxes
- Heat Tracing Solutions
- Thermostat
- Enclosure Heaters
- Cable Cleats
- +4
Aviation · 17 products · 7 product groups
Aviation Lighting & Control Systems for Helideck
Our Aviation solutions provide compliant, high-performance lighting and control systems for helidecks, both offshore and onshore, as well as hospitals and other critical infrastructure.
See the area →How we help
More than the products
Project management
Sizing, lighting and heat loss calculations, documentation for class and commissioning.
Own factory
Designed, built and tested under one roof, with short delivery times and room for changes.
Datasheets and certificates
Datasheets, Ex certificates, declarations of conformity and STEP files are on every product page.
Talk to an engineer
Send us the drawings or the equipment list and we propose a solution, part numbers and documentation.
Cable Glands, Stopping Plugs & Adaptors
9 part numbersEx eb IICIP 66/67Brass
View part numbers
Ex e stopping plug in brass with short 9 mm thread, O-ring, IP66/67, with or without lock nut. 9 variants – select by entry thread below.
Cable Glands, Stopping Plugs & Adaptors
TEF 794/650 Ex e Stopping Plug – Stainless Steel AISI 316, 9 mm, M16–M32
8 part numbersEx eb IICIP 66/67AISI316
View part numbers
Ex e stopping plug in stainless steel AISI 316 with short 9 mm thread, O-ring, IP66/67, with or without lock nut. 8 variants – select by entry thread below.
4 part numbers
View part numbers
3-wire Pt100 line sensing probe for heat tracing thermostats and controllers: Ø 6 × 60 mm tip, 300 mm element, −35 to +500 °C, Ø 5 mm silicone cable in 3, 5, 10 or 15 m, IP66. Select the cable length below.
Adapters & Reducers
38 part numbersEx eb/ed IICIP 66/67Brass
View part numbers
Ex e / Ex d thread adaptor in brass with metric male thread, for fitting a cable gland in a different entry size, Zone 1, Zone 2 and safe area. 38 variants – select by male and female thread below.
Adapters & Reducers
43 part numbersEx eb/ed IICIP 54Brass
View part numbers
Ex e / Ex d thread adaptor in brass with NPT male thread, for fitting a cable gland in a different entry size, Zone 1, Zone 2 and safe area. 43 variants – select by male and female thread below.
Adapters & Reducers
TEF 660 Ex e/Ex d Adaptor – Stainless Steel AISI 316, metric male thread
38 part numbersEx eb/ed IICIP 66/67AISI316
View part numbers
Ex e / Ex d thread adaptor in stainless steel AISI 316 with metric male thread, for fitting a cable gland in a different entry size, Zone 1, Zone 2 and safe area. 38 variants – select by male and female thread below.
Adapters & Reducers
TEF 660 Ex e/Ex d Adaptor – Stainless Steel AISI 316, NPT male thread
43 part numbersEx eb/ed IICIP 54AISI316
View part numbers
Ex e / Ex d thread adaptor in stainless steel AISI 316 with NPT male thread, for fitting a cable gland in a different entry size, Zone 1, Zone 2 and safe area. 43 variants – select by male and female thread below.
Adapters & Reducers
6 part numbersEx eb IICIP 66/67Brass
View part numbers
Fixed 90° Ex e angle adaptor in brass with metric male thread and metric or NPT female thread, O-ring, IP66/67. 6 variants – select by thread pair below.
Adapters & Reducers
TEF 663 Ex e Angle Adaptor 90° – Stainless Steel AISI 316, M20/M25
6 part numbersEx eb IICIP 66/67AISI316
View part numbers
Fixed 90° Ex e angle adaptor in stainless steel AISI 316 with metric male thread and metric or NPT female thread, O-ring, IP66/67. 6 variants – select by thread pair below.
Adapters & Reducers
3 part numbersEx eb IICIP 66/67Brass
View part numbers
Adjustable Ex e angle adaptor in brass with swivel, metric male and female thread, O-ring, IP66/67. 3 sizes – select by thread size below.
Adapters & Reducers
TEF 664 Ex e Adjustable Angle Adaptor – Stainless Steel AISI 316, M20–M32
3 part numbersEx eb IICIP 66/67AISI316
View part numbers
Adjustable Ex e angle adaptor in stainless steel AISI 316 with swivel, metric male and female thread, O-ring, IP66/67. 3 sizes – select by thread size below.
Breather / Drain Plug
3 part numbersIP66Brass
View part numbers
Ex eb / Ex tb drain plug and breather in brass for junction boxes and enclosures in Zone 1, Zone 2, 21 and 22. IP66, −60 to +130 °C, M25 with 9 or 15 mm entry, matching lock nut. Select below.
Breather / Drain Plug
TEF 731 Drain Plug / Breather Ex eb, Ex tb – Stainless Steel AISI 316, M25
3 part numbersIP66AISI 316
View part numbers
Ex eb / Ex tb drain plug and breather in stainless steel AISI 316 for junction boxes and enclosures in Zone 1, Zone 2, 21 and 22. IP66, −60 to +130 °C, M25 with 9 or 15 mm entry, matching lock nut. Select below.
11 part numbers
View part numbers
Low-profile cable clamps in 16 mm acid-resistant stainless steel AISI 316L for one or two cables from 8 to 38 mm, plus a weld-on support with two M6 holes. Ten sizes, Ø 7 mm mounting hole, 2.0–3.0 mm thick. Select below.
Accessories
6 part numbersBrass
View part numbers
Brass earth tag fitted under the cable gland or lock nut for bonding gland, armour and enclosure to earth. Six sizes M16–M50 – select below.
7 part numbersBrass
View part numbers
Brass insert that blanks an unused E204/622 or E205/624 cable gland while keeping its Ex e certification and IP66/67 rating. Seven sizes by sealing ring code A1–E2, with STEP files – select below.
Accessories
10 part numbersPTFE (Teflon)
View part numbers
Flat PTFE (Teflon) gasket, 2 mm thick, for sealing between cable gland and enclosure. Required to maintain the IP rating of TEF E204/622, E205/624 and D621 glands. Ten sizes M12–M90 – select below.
8 part numbersAISI 316
View part numbers
Internally serrated washer in stainless steel AISI 316, fitted between cable gland and enclosure for earth continuity and resistance to loosening under vibration. Eight sizes M16–M75 – select below.
Lock Nuts
10 part numbersBrass
View part numbers
Hexagonal brass lock nut with female metric thread for fastening cable glands, stopping plugs and adaptors. Ten sizes M16–M100 – select below.
8 part numbersAISI 316
View part numbers
Hexagonal stainless steel AISI 316 lock nut with female metric thread for fastening cable glands, stopping plugs and adaptors in corrosive and offshore environments. Eight sizes M16–M75 – select below.
4 part numbersBrass
View part numbers
Self-locking hexagonal brass nut with female metric thread for cable glands, stopping plugs and adaptors exposed to vibration. Four sizes M16–M32 with STEP files – select below.
Floodlights
TEF 2580 BlueLine Floodlight, 1st Generation (discontinued) – replaced by TEF 2580 LED 2.0
Discontinued14 part numbersIP 66/67LEDAluminium
View part numbers
First generation BlueLine LED floodlight, 200 W / 20 000 lm or 300 W / 30 000 lm, 5000 K, narrow, medium, wide or oval beam, with or without DALI. Discontinued; part numbers and datasheet TPS6475 are kept for reference. Recommended replacement: TEF 2580 LED 2.0 Generation.
Cable Glands, Stopping Plugs & Adaptors
18 part numbers
View part numbers
Heavy-duty BSP cable entries for safe areas from our own factory: TEF 714 cable gland with lock nut, TEF 716 stuffing flange for bolting to thin bulkheads, and TEF 718 terminal tube for pipe ends. 1/2", 3/4" and 1" for 8–24 mm cable, brass or aluminium, with neoprene grommet and two pressure rings. 18 part numbers – select below.
Cable Glands, Stopping Plugs & Adaptors
CMP Compound Barrier Cable Gland PX2K / PXSS2K – Ex d/e, brass, M20 to M75
32 part numbers
View part numbers
Rapid-set compound barrier glands from CMP for Ex d and Ex e enclosures: PX2K for armoured SWA cable and PXSS2K for unarmoured and braided cable, M20 to M75 in brass, armoured M20–M40 also in nickel plated brass. 32 part numbers – select by thread and cable diameter below.
Raychem Heat Tracing Cables
Raychem KTV2-CT Self-Regulating Heating Cable (not stocked) – see XTVR2-CT
Discontinued230 V
View product
Self-regulating heating cable with fluoropolymer outer jacket for process temperature maintenance up to 150 °C and intermittent exposure up to 250 °C, approved for hazardous areas. No longer part of our stocked range; the closest current alternative is XTVR2-CT. Available on request for projects.
Navigation Lights
TEF 2882 K2W LED Navigation Light (discontinued) – replaced by TEF 2880
Discontinued31 part numbers
View part numbers
Compact LED navigation light with K2W S64 light source in a Tranberg BlueLine box, simplex and duplex, for vessels over 20 m. The series is discontinued; part numbers and datasheet are kept for reference, and the recommended replacement is the TEF 2880 Simplex or Duplex.
Discontinued47 part numbers
View part numbers
The DHR70N and DHR80 LED navigation lights from Den Haan Rotterdam are discontinued. Part numbers and DHR datasheets are kept here for reference and remaining spare parts; the recommended TRANBERG® replacements are the TEF 2870 brass lantern and the TEF 2880 LED lantern.
